IBM 22P9176, Руководство пользователя

Страница: 19 / 76

Connecting the Multi-Burner using configuration 2
To connect the Multi-Burner to your system, complete the following procedure.
Refer to Figure 1-2 during installation.
1. Turn on your computer.
2. Using the USB cable
A
, insert the cable plug
1
into the USB connector of
the drive while squeezing the two buttons on the connector.
3. Plug the standard USB connector
2
into the USB port of your computer.
4. Using the USB cable
B
, insert the cable plug
3
into the DC IN connector of
the drive.
5.
Plug the standard USB connector
4
into the USB port of your computer.
B
A
Figure 1-2. Configuration 2: USB standard bus power configuration
Chapter 1. Multi-Burner quick install
1-5