IBM 22P9176, Руководство пользователя

Страница: 17 / 76

Configuration 1: self power (AC adapter) configuration
The Multi-Burner is usually used with the self power (AC adapter) configuration.
Requirements
v
Standard USB cable and power cable assembly (shipped with this option); IBM
Part Number 22P9188
v
AC adapter (shipped with this option)
Specifications
Read and write CD and DVD media are supported.
Connecting the Multi-Burner using configuration 1
To connect the Multi-Burner to your system, complete the following procedure.
Refer to Figure 1-1 during installation.
1. Turn on your computer.
2. Using the USB cable
A
, insert the cable plug
1
into the USB connector of
the drive while squeezing the two buttons on the connector.
3. Plug the standard USB connector
2
into the USB port of your computer.
4. Connect the AC adapter to the DC IN connector
3
on the Multi-Burner.
Note: USB cable
B
is not required for this configuration.
B
A
Figure 1-1. Configuration 1: self power (AC adapter) configuration
Chapter 1. Multi-Burner quick install
1-3