IBM 2210, Руководство по установке и первоначальной настройке

Страница: 33 / 72

Supported bit rates (in bps) are:
¹
1200
¹
2400
¹
4800
¹
9600
¹
19 200
¹
38 400
IBM 3161 Setup Attributes
Activate setup mode in the IBM 3161 terminal by pressing the Ctrl and Setup keys.
The Ctrl key is located on the lower left of the keyboard. The Setup key is located
on the upper right of the keyboard. The terminal displays a setup attribute panel.
Change the attributes by moving the cursor to the various fields and typing over the
information in the field. Use Table 5 to help you determine the settings for the
setup attributes.
Press Send to save the attributes on this panel.
Supported bit rates (in bps) are:
¹
1200
¹
2400
¹
4800
¹
9600
¹
19 200
You now need to set up additional attributes for the 3161. To set up the additional
attributes:
1. Press Select to display the attribute selection bar.
2. Change the values on the selection bar to match the values in Table 6 on
page 18.
To move between selections while on a selection bar, press Tab. To change a
value for an attribute, press the spacebar.
3. Press Send to accept the current values for the attributes on the selection bar.
4. Continue with step 2 until you have set all the attributes in Table 6 on
page 18.
5. Press Select after the last selection bar to exit the 3161 setup function.
Table 5. Setup Attributes for the IBM 3161
Attribute Setting
Machine Mode 3161
Operating Mode ECHO
Interface RS-232C
Line Control IPRTS
Turnaround Character CR
Stop Bit 1
Word Length (bits) 8
Response Delay (ms) 100
Break Signal (ms) 500
Chapter 3. Accessing Your IBM 2210
17