IBM 200 GB LTO-2 Скачать руководство пользователя страница 15

Страница: 15 / 104

Chapter 2. Installing the tape drive

This section contains information on installing the tape drive in IBM servers and
other computers.

Package contents

In addition to this book, this package contains:

IBM 200/400 GB LTO-2 Internal Tape Drive

Mounting screws

Jumpers

Backup application CDs (trial versions)

Safety Information manual

Cleaning cartridge

Device drivers in the Device Driver folder on the

User’s Guide

CD.

Internal SCSI cable

Contact your place of purchase if an item is missing or damaged. Be sure to retain
your proof of purchase and packing material. They might be required to receive
warranty service.

Installation requirements

To install this drive, you must have the following:

Low-voltage (Ultra2)

or a SCSI-3 host adapter

Documentation for your computer, SCSI bus adapter or external closure

A SCSI-3 active terminator if you are installing the tape drive at the end of a
SCSI-3 device chain

or an LVD active terminator if you are installing the tape

drive at the end of an LVD SCSI device chain

Phillips and flat blade screwdrivers for the mounting screws and for opening
your computer

Flat-nose pliers (optional) to install and remove jumpers

An available 5.25-inch full high drive bay

Installing the drive in IBM servers

The tape drive is compatible with many IBM xSeries servers. Please go to
ww.pc.ibm.com/us/compat, click on

Tape Backup Units

, then search for 59P6744

for a complete and current list of supported IBM hardware and software.

1. This tape drive can be installed on an Ultra2 LVD SCSI device chain, but doing so will limit the performance of the drive.

2. SCSI termination might be provided with your computer or SCSI adapter. Refer to the documentation that comes with your

computer or SCSI adapter for more information.

Содержание 200 GB LTO-2









































































































Результаты поиска

Содержание 200 GB LTO-2

Отзывы:

Похожие инструкции для 200 GB LTO-2

Бренды по названию

Популярные бренды

IBM 200 GB LTO-2, Руководство пользователя

Результаты поиска

Содержание 200 GB LTO-2

Отзывы:

Похожие инструкции для 200 GB LTO-2

Бренды по названию

Популярные бренды