IBM 1G, Руководство пользователя

Страница: 34 / 52

Configuring Management Port settings
Procedure
Use the Management Port page to configure IP settings for the management port.
Field Description
IP Address IP address of the management port
Default: 192.168.0.111
Network Mask IP address of the network or subnet mask
Default: 255.255.255.0
Gateway IP address of the network gateway
Default: 192.168.0.1
DNS 1 IP address of the primary domain name system server
Default: 192.168.0.1
DNS 2 IP address of the secondary domain name system server
Default: 0.0.0.0
Setting up e-mail notifications
About this task
TheNetwork Active Bypass unit provides an e-mail notification function that you can configure to send
an e-mail message when the switching mode of a segment has changed. Use the Email Notification page
to configure e-mail servers and accounts, and to enable or disable notifications.
Procedure
Set the values as indicated in the following table.
Field Description
Email Notification Enable or disable e-mail notification
Default: Disabled (Don't send)
Outgoing Mail Server (SMTP) Address of the appropriate outgoing SMTP mail server
Outgoing Mail Server (SMTP) Port Port number of the outgoing SMTP mail server
Default: 25
SMTP Username User name for the outgoing SMTP mail server
SMTP Password Password for the outgoing SMTP mail server (if
applicable)
Outgoing Server (SMTP) Security SSL encryption used between the SMTP mail server and
mail client
Default: Enable (Secured)
From (Sender's email address) Name or address that should be displayed in the From
field of an outgoing e-mail message
To (List of recipients, comma separated)
List of e-mail addresses to whom the notification should
be sent
16
1G Network Active Bypass: User Guide