IBM 10G Network Active Bypass, Руководство пользователя

Страница: 42 / 56

Table 17. Analyzer panel
Field Description
Status Shows link status. If connected, it also shows the port
speed.
SFP Part No. Vendor part number of the SFP/SFP+ module attached
SFP Vendor Vendor of the SFP/SFP+ module attached
Backup or restore settings
Use the Settings page to make a backup file or to return the 10G Network Active Bypass unit to its
default settings.
The follow settings are used for backing up or restoring the 10G Network Active Bypass unit:
Table 18. Backup or restore settings
Field Description
Save Settings Saves a copy of the current settings on the 10G Network
Active Bypass unit in a file named
config.txt
Load Settings Location of a stored backup file. Type the file location or
navigate to the file, and click
Restore From .
Reset to previous settings Resets to previous settings by loading a backup copy of
the system configuration into the system.
Restore settings to factory defaults Restores the 10G Network Active Bypass unit to the
default configuration and then restarts it
Important: The IP address for the management interface
is not reset.
24
10G Network Active Bypass V3.4: User Guide