IBM 10G Network Active Bypass, Руководство пользователя

Страница: 37 / 56

Email notification settings
Use the Email Notification page to configure email servers and accounts, and to set up the 10G Network
Active Bypass unit to send email messages when the switching mode of a segment has changed.
The following settings are used for configuring email servers and accounts, and for setting up email
notifications:
Table 11. Email notification settings
Field Description Default
Email Notification Enable or disable email notification Disabled (Don't send)
Outgoing Mail Server (SMTP) Address of the appropriate outgoing
SMTP mail server
Outgoing Mail Server (SMTP) Port Port number of the outgoing SMTP
mail server 25
SMTP User Name User name for the outgoing SMTP
mail server
SMTP Password Password for the outgoing SMTP
mail server (if applicable)
Outgoing Server (SMTP) Security SSL encryption used between the
SMTP mail server and mail client Enabled (Secured)
From (Sender's Email Address) The name or email address of the
sender, which is displayed in the
From field of an outgoing email
message.
To (List of recipients, comma
separated) The names or email addresses of the
people the message is sent to, which
are displayed in the
To field of an
outgoing email message.
Subject The subject of the email, which is
displayed in the
Subject field of an
outgoing email message.
Heartbeat status template Template for email notification of
heartbeat status change Heartbeat segment ${segment}:
state=${
hb_state_name
},
OpMode=${
op_mode_name
}
Power template Template for email notification of
power supply status change Power: supply ${
power_supply
} is
${
power_state?OFF:ON
}
Chapter 2. Setting up the 10G Network Active Bypass unit
19