Ibiza MOBILE800, Инструкция по эксплуатации

Страница: 4 / 24

MANUAL - MOBILE800
4
©Copyright LOTRONIC 2023
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
WE CANNOT BE HELD RESPONSIBLE FOR DAMAGED BATTERIES FURTHER TO THE NON-OBSERVANCE
OF THESE BASIC RULES.
DESCRIPTION OF THE TOP PANEL CONTROLS & CONNECTORS
1. ON / OFF 11.MIC VOL 21.VOL
2. DC 15V Charging Port 12. TREBLE 22.BASS
3. Charging Indicator 13. DELAY- / DELAY+ 23.REPEAT
4. MIC Input 2 14. Next Folder 24.MIC PRI
5. MIC Input 1 15. Previous Folder 25.X-BASS
6. Guitar Input 16. MODE 26.LED MODE
7. AUX 17. Previous Track 27.TWS
8. USB 18. Next Track 28.REC
9. TF 19. Play / Pause 29.Display
10. ECHO 20. GT VOL
BASIC FUNCTIONS
BLUETOOTH OPERATION
1) ON/OFF switch: Press switch (1) to turn on. The display will show “bt” in the centre. "BT" will flash slowly in
the lower left corner to indicate that the speaker is on. Press again to turn off.
2) Activate the Bluetooth function on your external Bluetooth device and search for “MOBILE-800”. If requested,
enter the password “0000”. After a successful pairing, a tone will be heard.
MIC INPUT
WARNING
: Turn the speaker’s volume knob all the way to the left to prevent any feedback or loud pops when
connecting the microphone.
Insert a standard 6.35mm connector of a wired microphone (included) into the microphone input jack (4) and
(5) on the top of the speaker. Control the microphone volume with the knob (11).
GUITAR INPUT
Insert a standard connector of a Guitar into the Guitar input jack (6) on the top of the speaker. Control the gui-
tar volume with knob (20).
USE WITH A WIRED DEVICE
To use the speaker as a wired device, plug one connector of the 3.5mm audio cable into the 3.5mm auxiliary
audio input jack (7) on the speaker. Plug the other connector into the headphone jack of your media-playing de-
vice. Press the button MODE (16) to switch into LINE mode. The display (29) will show “LINE”. Use the controls
of your wired device to control playback.
USB INPUT
Insert USB device into USB port (8) to play music stored on the drive. The play will start automatically.
MICRO SD INPUT (TF)
Insert a microSD card into the TF port (9) to play music stored on the drive. The play will start automatically.
ECHO(10)
Use this knob (10) to set the ECHO of the microphone. It can be used in conjunction with button (13) to control
the delay of the echo. The higher the value, the more echo you will get.
TREBLE
Use the knob (12) to control the treble of speaker.
BASS
Use the knob (22) to control the basses of the speaker.
DELAY - / DELAY + (13) USED WITH KNOB (10)
Used with knob (10), this knob will control the delay of the mic echo effect. The higher the value, the more echo
you will get.