MANUAL - E-WASH100
5
www.ibiza-light.com
CAUTION
Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause
a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to check correct polarity
and to make sure the pins are not grounded or shorted to the shield or each other.
OPERATING INSTRUCTIONS
NAVIGATION THROUGH THE CONTROL PANEL
Access control panel functions using the four panel buttons located directly underneath the LCD Display..
Button
Function
MENU
Used to access the menu or to return to a previous menu option
UP
Scrolls through menu options in ascending order
DOWN
Scrolls through menu options in descending order
ENTER
Used to select and store the current menu or option within a menu
When a menu function is selected, the display will show immediately the first available option for the selected
menu function. To select a menu item, press <ENTER>.
MENU MAP
1
Addr
001-512
DMX Address
2
CHnd
16CH
DMX Channel Mode
14CH
3
SLnd
Auto
Auto Mode
Soun
Sound Control Mode
SL 1
DMX Mode
SL 2
Slave Mode
4
SHnd
SH 0
Effect 0 (Recommended)
SH1
Effect 1
SH2
Effect 2
SH3
Effect 3
5
SEnS
0-99
Sound sensitive
6
bLAnd
bLAc
No DMX signal in zero
Auto
No DMX signal Auto running
Soun
No DMX signal Sound Control
HoLd
No DMX signal keep last status
7
LEd
OFF
Display board will off after 5s
ON
Display keep on
8
dISP
no
Display Reverse
YES
Display Positive
9
rPAN
no
Pan Positive
YES
Pan Reverse
10
rTiL
no
Tilt Positive
YES
Tilt Reverse
11
REST
YES
Reset
CARE
Before cleaning the unit, disconnect it if from the mains. Do not use aggressive cleaning agents. Use a clean
cloth to wipe any dust or dirt from the product. We are not liable for damage arising from incorrect handing,
improper use or wear and tear. We reserve the right to make technical modifications.
UP
DOWN
MENU
ENTER
8.8.8.8.