©Copyright LOTRONIC 2012
Page 3
How To Control The Unit
There are three ways to operate the unit:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
A. Master/Slave operation
In master/slave mode you can link as many units together in a days-chain to perform the built-in pre-programmed
lighting shows triggered by music.
For Master/Slave mode please refer to the DMX settings below:
Master unit: when working at
Auto-run
or
Sound
Control mode operation
Slave units: DMX start address MUST be set to d001.
LED display as below:
DMX code setting: D001~D512
CH1
LED Dimmer
（
0~255
）
CH2
Flash
（
0~255
）
CH3
Motor gobo
（
0~255
）
CH4
Motor mirror
（
0~255
）
CH5
Auto DMX
（
11~200
）
Sound DMX
（
201~255
）
Manual setting mode:
A1 Mode
Auto setting
Speed 1~9
A2 Mode
Auto setting(Not Flash)
Speed 1~9
A3 Mode
Auto setting( Flash)
Speed 1~9
A4 Mode
Auto setting(Cyclical changes)
Speed 1~9
S1 Mode
Sound active setting
Speed 1~9
S2 Mode
Sound active setting (Flash)
Speed 1~9
S3 Mode
Sound active setting (Not Flash)
Speed 1~9
