ibidi Universal Fit 10918, Инструкция по эксплуатации

Страница: 8 / 32

ibidi Heating System, Universal Fit
Table 1 – (continued)
Connector to Gas Incubation: Female Luer Lock
Heated Plate 12 mm × 85.5 mm × 127.5 mm
Observation area: 40 mm × 82 mm
Length of cable: 1.5 m
Heated Plate assembled with
Heated Lid
Height: 25.5 mm
Weight: 330 g/0.46 lbs
Heating Inserts all 47 mm × 97 mm
Heating Insert 35 mm Dish high Height without blank holder: 8 mm
Height with blank holder: 16-18 mm
Observation area:
22 mm
Weight insert: 50 g/0.11 lbs
Weight blank holder: 72 g/0.16 lbs
Heating Insert 35 mm Dish low Height without blank holder: 8 mm
Height with blank holder: 13-15 mm
Observation area:
22 mm
Weight insert: 50 g/0.11 lbs
Weight blank holder: 47 g/0.11 lbs
Heating Insert Slides Height without blank holder: 8 mm
Height with blank holder: 13-15 mm
Observation area: 49 mm × 22 mm
Weight insert: 42.5 g/0.94 lbs
Weight blank holder: 38.5 g/0.85 lbs
USB cable Length: 1.8 m
Power supply cable Length: 2.0 m (power supply to wall)
Length: 1.2 m (power supply to device)
Temperature Control Range
Heated Lid Ambient temperature (min. 18°C) to +45°C
Accuracy: ±0.2°C (at sensor location)
±5°C (entire heated glass)
Heated Plate Ambient temperature (min. 18°C) to +45°C
Accuracy: ±0.2°C (at sensor location)
±0.5°C (entire heated plate)
Recommended Temperatures before Adjustment
See Section 5.4
USB Interface
Connector type USB 2.0 Connector Type B
Recommended USB cable Tripp Lite UR022-006 (shielded)
Driver FTDI VCP driver
Version 2.2 (May 23, 2019) 8 Instruction Manual