Objective Heater Universal – Silver Line
Table 1: (continued)
Compatibility With Temperature Controllers and Temperature Control Range
Compatibility
ibidi Temperature Controller – Silver Line
Temperature control range
Ambient temperature (min. 18°C/64°F) to 45°C/113°F
Recommended temperature settings
See Section
NOTE
– The Objective Heater is only compatible with the ibidi Temperature Controller –
Silver Line, hereafter abbreviated and referred to as ”Temperature Controller”.
1.6
Disclaimer
• ibidi shall not be held liable, either directly or indirectly, for any damage incurred as a result of
product use.
• The contents of this manual are subject to change without notice for product improvement.
• This manual is considered complete and accurate at publication.
• This manual does not guarantee the validity of any patent rights or other rights.
• If an ibidi software program doesn’t function properly, this may be caused by a conflict from
another program operating on the computer. In this case, take corrective action by uninstalling
the conflicting product(s).
• ibidi is a registered trademark of ibidi GmbH in Germany and other countries.
1.7
Safety Considerations
WARNING
• Only operate the Objective Heater with the supplied components and the Temperature Con-
troller.
• Only use the cables and plugs delivered with the Objective Heater. The power plug of the
control unit must be inserted in an outlet with a ground (earth) contact.
• Do not replace detachable power cables with inadequate specifications power cables. By vio-
lating these instructions you risk electric shock and fire.
• Do not operate the Objective Heater under conditions that pose a risk of explosion, implosion,
or the release of gases.
Instruction Manual
7
Version 1.0 (June 1, 2022)
Содержание 12170
Страница 2: ...Objective Heater Universal Silver Line Version 1 0 June 1 2022 2 Instruction Manual ...
Страница 18: ...Objective Heater Universal Silver Line Version 1 0 June 1 2022 18 Instruction Manual ...
Страница 19: ...Objective Heater Universal Silver Line Instruction Manual 19 Version 1 0 June 1 2022 ...