ibidi 10929 страница 8 Скачать руководство пользователя

Страница: 8 / 28

ibidi Heating System, Multi-Well Plates, K-Frame

1.5

Disclaimer

• ibidi shall not be held liable, either directly or indirectly, for any damage incurred as a result of

product use.

• The contents of this manual are subject to change without notice for product improvement.

• This manual is considered complete and accurate at publication.

• This manual does not guarantee the validity of any patent rights or other rights.

• If an ibidi software program doesn’t function properly, this may be caused by a conflict from

another program operating on the computer. In this case, take corrective action by uninstalling
the conflicting product(s).

• ibidi is a registered trademark of ibidi GmbH in Germany and other countries.

1.6

Safety Considerations

WARNING!

• Only operate the ibidi Heating System, Multi-Well Plates, K-Frame with the supplied compo-

nents.

• Only use the cables and plugs delivered with the system. The power plug of the control unit

must be inserted in an outlet with a ground (earth) contact.

• Do not replace detachable power cables by power cables with inadequate specifications. By

violating these instructions you risk electric shock and fire.

• Only use extension cables that have a protective ground wire.

• Do not operate the ibidi Heating System, Multi-Well Plates, K-Frame under conditions that pose

a risk of explosion, implosion, or the release of gases. Only operate the ibidi Heating System,
Multi-Well Plates, K-Frame with aqueous solutions.

• Do not operate a damaged ibidi Heating System, Multi-Well Plates, K-Frame. If the housing

seems damaged or something is rattling inside the controller, contact the

ibidi service hotline

for repair.

• Some accessible parts of the Heated Plate and Heated Lid can reach temperatures up to 55°C.

Avoid touching the temperature-controlled parts of the system when you have set the Temper-
ature Controller to high temperatures.

CAUTION

• Ensure that the external power supply is easily accessible. The ibidi Heating System, Multi-

Well Plates, K-Frame must be installed in a manner such that none of its components hinders
access to the external power supply.

Version 2.0 (March 22, 2019)

Instruction Manual

Содержание 10929





























Результаты поиска

Содержание 10929

Отзывы:

Похожие инструкции для 10929

Бренды по названию

Популярные бренды

ibidi 10929, Инструкция по эксплуатации

Результаты поиска

Содержание 10929

Отзывы:

Похожие инструкции для 10929

Бренды по названию

Популярные бренды