iBell IBL 550S, Руководство оператора

Страница: 12 / 13

11
Suspected malfunctions are often due to causes that the users can
fix themselves, therefore check the product using this section.
Problems Causes Solutions
1. Difficult to
see through
filter.
Protective film
on front/inside
cover lens not
removed
Remove protective film
Front/inside
cover lens dirty Clean or replace front/inside
cover lens
Filter lens dirty Clean filter lens
2. Filter does not
darken when
arc is struck
Grind Mode
Selected Select Weld Mode and adjust
Shade from 9 to 13
Sensors or Solar
Panel blocked
Make sure sensors or solar
panel are exposed to weld arc
without blocking
Set Sensitivity to
LOW Adjust sensitivity to required
level
Low Voltage of
lithium battery Replace with new lithium
battery if indicator turns red
3. Filter darkens
without arc
Set Sensitivity to
HIGH Adjust sensitivity to required
level
4. Filter remains
dark after
welding
Set Delay to MAX Adjust delay to required level
TROUBLESHOOTING
IBL 550S