iBell Tools IBL M200-105, Руководство оператора

Страница: 15 / 21

14
NOTE:
When the drive pressure is set correctly, there should
be no slippage between the wire and the drive roller. If
obstruction occurs along the feed path, the wire should then
slip on the drive roller. This can be checked by squeezing the
wire between two fingers with moderate force as it comes out of
the gun. If this stops the wire from feeding, increase pressure
until the wire feeds through your fingers without issue.
▪
Check if the drive roll is slipping on the wire and increase
pressure on the pressure arm adjustment knob if necessary.
MAG Gun
MAG Connection:
▪
For MAG, Connect the grounding clamp into quick socket with
the polarity of ‘
+ ’
(not like in the MMA)
tighten it by force; the
grounding clamp connects to the work-piece.
Earth clamp
Work piece
IBL M200-105