iBell Tools IBL M200-105, Руководство оператора

Страница: 13 / 21

12
▪
Lower the pressure arm so as to raise the roller retainer to feed
wire through the drive roll.
III
IV
V
VI
▪
While turning the wire reel counter-clockwise, pass the end of
the wire through the guide tube.
▪
Guide the wire to the correct roller groove
(according to its size)
Push it through to the inlet tube of the torch.
▪
Place the retainer back and Pull up the pressure arm back to
position and turn the knob clockwise.
NOTE:
The placement of the reel should be such that the wire
comes off the spool, it will look like the illustration above. The
wire should unspool from the bottom, and the spool will
rotate in a counter-clockwise manner
.
.
▪
Wire from reel to the drive should relax with a slight curve after
feeding, it should not be a tight-line.
IBL M200-105