background image

 

 

 

 

 

Do not operate this product where oxygen is being 
administered

. Do not pump anything other than atmospheric air. 

Use only in well ventilated areas. 

 

This inflator will become very hot during as well as 
immediately after use

. Do not touch any part of this inflator with 

bare hands other than the ON/OFF switch during and immediately 
after use. 

 

This inflator is designed for occasional use only.

 Operation 

over an extended period of time will overheat the unit and 
damage the inflator.  
 

 
 
 
 

 

Always operate the car tyre inflator at or below the maximum 
pressure rating of the inflator

. (Refer to Specifications section 

of this manual). Operations exceeding maximum pressure ratings 
will result in damage to car tyre inflator. 

 

Only operate the car tyre inflator in well ventilated areas.

  

 

Inflator performance is enhanced when operating with vehicle 
engine running. 

 

Before using the car tyre inflator, inspect the exterior to ensure it 
is free from defects. 

Do not use the car tyre inflator if it is 

damaged. 

 

It is strongly recommended that you keep the vehicle’s engine 
running while using the car tyre inflator to prevent discharge of 
your vehicle’s battery.  

 

Connect the pump only to a 12V DC, 10-12A cigarette lighter; 

You may also use a 12V battery charger to power this inflator, but 
it must be rated at 10A or more to avoid damage to the inflator 
(but not highly recommended).

 

 

Do not overinflate tires. High pressure air can cause injury

.  

Do not use air inflator on high pressure tires such as those used 
on large trucks. 

         IBL CA12-97 

 

  

                           OPERATING INSTRUCTIONS  

 

 

 

 

 

Содержание CA 12-97













Отзывы: