10
Suspected malfunctions are often due to causes that the users can
fix themselves, therefore check the product using this section.
Problem
Possible Cause
Solution
1.
Inflator
not running
1.1 No power, or
switch in OFF
position.
1.2 Blown fuse
1.3
Motor overheats
1.1 Make sure
inflator switch
is ON.
1.2 Disconnect
inflator from
power source,
replace the fuse.
1.3 Let inflator
cool off for about
30 minutes for
thermal overload
switch reset.
2.
Inflator
not starting
2.1 Lack of proper
ventilation/ambient
temp too high.
2.2 Inflator valves
Failed.
2.1 Move inflator
to well ventilated
area, or area with
lower ambient
temperature.
2.2 Service or replace
inflator.
3.
Excessive
knocking or
rattling
3.1 Worn bearing on
eccentric or motor
shaft.
3.2 Cylinder or piston
ring is worn.
3.1 Service or replace
inflator.
3.2 Service or replace
inflator.
4.
Inflator
air flow lower
than normal,
or cannot
pump to
higher
pressures
4.1 Worn piston ring or
inlet valve.
4.1 Service or replace
inflator.
TROUBLESHOOTING
IBL CA12-97
