IBC V-10, Руководство пользователя

Страница: 14 / 103

System faults . Faults typically related to the touchscreen controller.
SIM Status . Operating SIM status errors. See About Status indicators on page 11 .
On the Error Logs screen, you can:
View one or more errors. See Viewing errors on page 79 .
Clear errors. See Clearing errors on page 79 .
Save an error log to an SD card or USB stick. See Backing up (exporting) error logs on
page 85 .
Delete or clear all entries in an error log. See Deleting or clearing an error log on page 85 .
1.4.3.6 Sensors and Channels
This screen provides information screens on:
Sensors - The Sensors status screen displays the current active value for each of the
temperature and pressure (e.g., water flow rate, VS load duty cycle and the altitude)
sensors. If a:
Temperature sensor is not connected to the controller the text ‘n/c’ is displayed.
Pressure sensor is not connected to the controller, ‘0’ is displayed.
ATD Channels - (Analog to-Digital conversion) Lists the raw, unfiltered input values from
the analog inputs.
1.4.3.7 Clear Errors
Errors are triggered when a sensor detects that the boiler is operating outside its limits. If more
than one error/alarm is present, the status bar slowly rotates though the various alarm states.
Status Bar
Color
Description
Green Normal state - boiler is operating within its limits.
Yellow Warning error - When the controller detects an error.
Red
Alarm - Unresolved condition or error detected while the boiler is firing or
preparing to fire that results in the boiler shutting down and entering a lock-out
state. To change these error lockout periods, see
Changing default error
lockout time periods on page 77 .
For minor errors, the boiler will lock out for 5 minutes, and then attempt
to restart automatically.
For major errors, the boiler will lock out for 60 minutes after 3
unsuccessful ignition attempts, and then attempt to restart.
Table 2 Status bar background colors
12
Section: Introduction and overview of the features in the V10 controller