![background image](http://html1.mh-extra.com/html/ibase-technology/et910/et910_user-manual_3219151029.webp)
BIOS SETUP
ET910 User’s Manual
25
Phoenix - AwardBIOS CMOS Setup Utility
SuperIO Device
Onboard Serial Port 1
3F8/IRQ4
ITEM HELP
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
RxD , TxD Active
Hi, Lo
Menu Level >
IR Transmission Delay
Disabled
UR2 Duplex Mode
Half
Use IR Pins
IR-Rx2Tx2
Parallel Port Mode
EPP Mode Select
ECP Mode Use DMA
SPP
EPP1.7
3
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
IDE DMA Transfer Access
This field has a default setting of
Enabled
.
On-chip Primary PCI IDE Enabled
This field, by default, is
Enabled
.
OnChip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select
Enabled
to activate each channel
separately.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are
Auto
and
Disabled
.
Содержание ET910
