iB-WRA300N
300M Wireless-N ADSL2+ Router User Guide
39
¾
WDS Settings:
Select On/Off to enable/disable WDS. With this function enabled, the Router
can bridge two or more WLANs.
•
MAC Address:
Enter the MAC Address you wish to bridge in the field.
¾
Wireless MAC Address Filter:
Wireless access can be filtered by using the MAC addresses
of the wireless devices transmitting within your network’s RADIUS.
•
Active:
If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for
don’t.
•
Action:
To filter wireless users by MAC Address, select “Allow Association” or “Deny
Association” the follow Wireless LAN station(s) association.
•
MAC Address:
Enter the MAC Address you wish to filter in the field.
)
Note:
For most users, it is recommended to use the default Wireless LAN Performance settings. Any
changes made to these settings may adversely affect your wireless network. Under certain
circumstances, changes may benefit performance. Carefully consider and evaluate any changes
to these wireless settings.
