Manual ibaPADU-8-ICP
26 Issue
1.7
The graphical representation of the ibaPADU-8-M device is not animated.
The large table on the left side and the fields on the right side of the PADU picture
show the settings of the Padu setup. If the FOB card is set to active mode by means of
ibaDiag, which is only possible when ibaLogic is not running at this time, you may call
the Padu setup dialog window by clicking on the button <Setup Padu M>.
Other documentation
For a more detailed description of the diagnostic functions and parameters please re-
fer to the ibaDiag manual which can be dowloaded from our website.
Finally, there is another level in the tree with more information, the module level.
In this view you may already see measured values running. By the way, this is working
independently from a software application such as ibaLogic or ibaScope.
Close the ibaDiag window in order to return to the next steps of the setup.
