Manual
ibaW-750
38
Issue 1.1
9.3.2
ibaW-750 - Outputs
All terminals, you have manually configured at the input side (under “Hardware”) or that
are detected automatically, are also displayed at the output side (under “Outputs”).
An
Analog
and a
Digital
tab are automatically created for the analog and digital output
terminals.
Figure 28: Device in the hardware module tree
The ibaW-750 device module is displayed as well under the menu item "Outputs" at the
corresponding link:
Figure 29: Device in the outputs module tree
The digital signals are listed in the
Digital
tab and the analog signals are listed in the
Analog
tab.
Using the expression builder, signals can be assigned to the output terminals.
Figure 30: Configuring output signals
Note
If the ibaNet-E connection to the ibaW-750 device is interrupted, the output signals be-
have according to the set property "ibaNet-E link broken", which can be found in the
Gen-
eral
tab.
