Manual
ibaW-750
36
Issue 1.1
Note
The device address is not reset.
Owner
If a module configuration has already been defined on the ibaW-750 device, the current
owner of this module configuration is displayed here.
After delivery or resetting to factory settings, this field is empty.
The owner corresponds to the computer name on which ibaPDA is installed and from
which this ibaW-750 device was most recently configured.
With the button <Refresh> the current owner of the module configuration can be retrieved
from the device at any time.
Meaning of the colors:
Green
The ibaPDA system currently accessing it is the owner
Orange Another ibaPDA system is the owner, but has not locked the module con-
figuration
Red
Another ibaPDA system is the owner and has locked the module configura-
tion
K-bus
Status
Running (K-bus acquisition is running)
I/O error (K-bus interrupted)
Configuration error (The device configuration is different from the connected terminals)
Current cycle time
Current sampling time
Maximum cycle time
Maximum sampling time
Number of initializations
Number of K-bus initializations
ibaNet-E
Connection
Direction and type of the ibaNet-E connection
