ibaW-750
Manual
Issue 1.1
33
ibaNet-E link broken
This property determines what happens with the outputs on the device when the ibaNet-
E link to ibaPDA is broken. Possible options:
Outputs keep last value
Outputs are reset to zero
Further functions
Autodetect terminals
The connected terminals will be detected automatically
Read configuration from the device
Reads the last saved configuration from the device
The changed settings become valid by clicking on <OK> or <Apply>.
9.3.1.2 Analog tab
The signal table for analog signals is automatically adjusted for each terminal type and
is arranged in the order of addition.
Figure 25: Module ibaW-750 – Analog tab
The signals “K-bus cycle time (actual)” and “K-bus cycle time (max.)” are available by
default. They can be enabled/disabled.
Name
The WAGO terminal number is automatically applied. One row per channel is displayed.
You can enter signal names and additionally two comments when clicking on the
symbol in the field “Name”.
Unit
You can enter a unit for the analog signal.
Gain / Offset
Gradient (Gain) and y axis intercept (Offset) of a linear equation. You can convert a
standardized value transferred without a unit into a physical value.
For making the calculation of Gain/Offset easier, an auxiliary dialog appears when click-
ing on the co-ordinate cross in the „Gain“ or „Offset“ field. In this dialog, you only enter
