ibaPADU-C-8AI
Manual
Issue 1.11
15
Note
The entries in the “config.ini” file, which can be modified, are highlighted in yellow in the
figure above. Other entries must not be modified.
When the network settings are to be activated, the hash signs
“#” before the entries “ipAd-
dress”, “subnetMask” and gatewayIpAddress”, which are marked green in the figure
above
, have to be removed in the “config.ini” file.
The IP address is given according to the "standard IPv4 dotted-decimal format":
d.d.d.d.
„d“ is a decimal number without leading zeros between 0 and 255.
5.
Possible settings:
dhcp
This setting determines, whether the IP address of the device
should be assigned by a DHCP server in the network
ipAddress:
IP address of the device
This setting will be ignored, if DHCP is activated
subnetMask:
subnet mask of your network
This setting will be ignored, if DHCP is activated
gatewayIpAddress:
Gateway IP address (for time synchronization)
This setting will be ignored, if DHCP is activated
timeServerIp:
Enter here the IP address of a timeserver (NTP), option
timeZone_h:
GMT (Greenwich Mean Time) + x (hours),
Example Kathmandu: +5
timeZone_min:
GMT (Greenwich Mean Time) + x (minutes),
Example Kathmandu: +45
autoShutdown_min:
Time until an automatic shut-down in minutes,
can be set from 1 to 60 min, 0 = no automatic shut-down