Manual
ibaPADU-8AI-U/-8AI-I
28
Issue 1.6
Connector type
1 x 16-pin multi-pin connector;
clamp-type terminal (0.2 mm
2
to 2.5 mm
2
), screw connection,
included in delivery
ibaNet interface
Number
1
Design
Fiber optic cable
ibaNet protocol
3Mbit
Data transmission rate
3.3 Mbit/s
Sampling rate
1 kHz
Connector type
2 ST connectors for RX and TX
The use of fiber optic cables of type 62.5
μm/125 μm is recom-
mended. For information on cable length, see chap. 10.3.
Transmitting interface (TX)
Output power 50/125 µm FO cable
-19.8 dBm to -12.8 dBm
62.5/125 µm FO cable
-16 dBm to -9 dBm
100/140 µm FO cable
-12.5 dBm to -5.5 dBm
200 µm FO cable
-8.5 dBm to -1.5 dBm
Temperature range -40 °F to 185 °F (-40 °C to 85 °C)
Light wavelength 850 nm
Receiving interface (RX)
Sensitivity
100/140 µm FO cable
-24 dBm to -10 dBm
Temperature range -40 °F to 185 °F (-40 °C to 85 °C)
Power supply
Power supply
24 V DC (±10%)
Power consumption max.
8 W
Connector type
1 x 2-pin multi-pin connector;
clamp-type terminal (0.2 mm
2
to 2.5 mm
2
), screw connection,
included in delivery
Further interfaces, operating and indicating elements
Ethernet
RJ45 socket (for service purposes only)
Notebook
RJ11 socket (for ibaCom-PCMCIA-F card only)
Indicators (LEDs)
4 LEDs for device status
8 LEDs for status of analog inputs
8 LEDs for status of digital inputs
Rotary switches
ibaPADU-8AI-U
ibaPADU-8AI-I
2, address setting, device mode
2, address setting, without function
3
Data for other FO cable diameters not specified
