ibaPADU-8AI-U/-8AI-I
Manual
Issue 1.6
23
3.
Alternatively you can add the device manually. Right-click on the link of the ibaFOB-D
card the device should be connected to. Select “Add module…” and then:
- “Padu 8” for ibaPADU-8AI-U
- “Padu 8-I” for ibaPADU-8AI-I.
The device will be listed in the signal tree.
Hold down the mouse button and drag the device to the address (link 1 – 8 below the
device), the device address switch S1 is set to.
4.
Make your settings in the „Padu 8” or “Padu 8-I” module of the I/O Manager.
