Manual
ibaMS8xAI-110VAC
26
Issue 1.4.1
Figure 14: Outputs ibaMS8xAI-110VAC
The filters are enabled and configured by means of signal outputs as well as the mode
for grid frequency measurement.
If “Buffered Access“ is enabled, you can see additional input and output signals.
Note
You need to apply the “Buffered Access“ by clicking on the <Apply> button. Only then,
you will see additional signals in the signal tree that can be configured as output or input
resources.
Signal
Description
Inputs
AI_110VAC_Ch[00…07]
Analog input signals
AI_Frequency_Ch[00…07]
Calculated grid frequencies
StatusIn
Status information about the plugged input module (for
output module without function):
0 = Module not initialized
1 = Module running
>1 = Mistake (e.g. module cannot be initialized)
