ibaDeskline SAS
Manual
Issue 1.4
27
1.
Loosen the fastening screw which is used to secure the power supply slide-in module
at the rack.
2.
Pull out the power supply slide-in module.
3.
Replace the power supply slide-in module with the module of the same type (availa-
ble at iba).
8.3
Restoring of a RAID system during operation
Only qualified professionals are allowed to replace a hard disk unit during operation!
Electrostatic discharge!
Touch the components only in electrostatically discharged state!
Important Note
The RAID system is not automatically restored after having changed the hard disk. Use
the program "Adaptec Storage Manager".
Note
The DVD "Adaptec Storage Manager" is included in the documentation.
If the program "Adaptec Storage Manager" is not yet installed on the device, install it
before carrying out the restorage.
If the buzzer sound can be heard at the same time, it is possible that a hard disk in the
RAID system is defective. To restore the RAID system, proceed as follows:
1.
Start the program " maxView Storage Manager ". The "Log in" window is displayed.
2.
Log in as follows:
User Name: administrator
Password: xadmin
