Manual
ibaDeskline SAS
24
Issue 1.4
(1):
Connection of redundant power supply unit: If a redundant power supply unit is
to be monitored, connect the twisted cable (black/red) of the power supply unit (1 –
picture above) to the 2-pin connector (1 – picture below) of the card. This connec-
tion is not necessary, when a standard power supply unit is used.
(2):
Power supply connection: Use the cable included in delivery. Connect the con-
nector of the power supply cable from the power supply unit (2 – picture above) with
the wide connector of the cable included in delivery (2 – picture below). Make sure
that the cables of the same color are connected. Plug one of the two narrow con-
nectors to the 4-pin connector (3) of the card, the second narrow connector is not
used.
