ibaPADU-16-M Manual
2
Safety instructions
2.1
Designated use
The device is electrical equipment. It may be used only in the following applications:
Automation of industrial systems
Measurement data logging and analysis
Applications of ibaSoftware products (ibaPDA, ibaLogic etc.)
The device may not be operated in mains supply circuits!
2.2
Important Information
Important note
The information in this manual does not purpose to cover all details or variations in
equipment, or to provide for every possible contingency to be met in connection with
installation, operation or maintenance.
Should further information be desired or should particular problems arise which are not
covered sufficiently for the purchaser’s purposes, please contact iba office.
Further, the contents of this manual shall not become a part of, nor modify, any prior or
existing agreement, commitment or relationship. The sales contract contains the entire
obligation of iba.
The warranty contained in the contract between the parties is the sole warranty of iba.
Any statements contained herein do not create new warranties nor modify the existing
warranty.
Electrical equipment has components which are at dangerous voltage levels.
If these instructions are not strictly adhered to, this can result in severe bodily injury
and material damage.
Only appropriately qualified personnel may work on this equipment or in its vicinity.
These personnel must be completely knowledgeable about all the warnings and ser-
vice measures according to this User Manual.
The successful and safe operation of this equipment is dependent on proper handling,
installation, operation and maintenance.
This board contains components which can be destroyed by electrostatic discharge.
Prior to touching any electronics board, your body must be electrically discharged. This
can be simply done by touching a conductive, grounded object immediately beforehand
(e.g. bare metal cabinet components, socket protective conductor contact).
Issue 2.1
7
