Portable Fume Extractor
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
product described. The continual observance of these procedures will help increase your production and extend the life of the
equipment.
8
Maintenance
Aluminum Mesh
-The Aluminum Mesh is washable and reusable.
-It will need to be replaced when worn, damaged, or when it
becomes so clogged that washing is no longer effective.
35% Prefilter
- It is not recommended to wash the Pre Filter.
-Need to replace new filter in about 3-6 months.
85% Prefilter
- It is not recommended to wash the Pre Filter.
-Need to replace new filter in about 3-6 months.
Pleated Filter
- It is not recommended to wash the Pleated Filter.
-Need to replace new filter in about 3-6 months.
HEPA
-It is not recommended to wash the HEPA Filter.
-If airflow remains weak after cleaning Aluminum Mesh and
Pre Filter, it will be necessary to replace the HEPA Filter.
Operation
The Portable Fume Extractor is designed for the filtration of
smoke generated during ordinary welding process work.
When installed and operated correctly, can effectively collect
and screen the smoke resulting from the welding work in
maintaining the air quality of the working environment.
WARNING: Before operation be sure to read this
entire manual carefully, make sure all Warning/Danger
sections are understood and proper safety equipment is
utilized.
-Check if relevant safety protection measures have been
taken according to the Manual.
-Please confirm the power, air volume and the matching
table of the Portable Fume Extractor.
-Connect power to system after complete assembly of
Portable Fume Extractor has been performed.
-Disconnect power when machine is not in use.
On/Off Switch
-Turn on and off the machine
Filter Indicator
-Auto detected the status of the filter, once the light is on,
please replace or clean the filter.
Variable speed control
-To adjust speed of air-flow.
