background image

Portable Fume Extractor 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the 
product described. The continual observance of these procedures will help increase your production and extend the life of the 
equipment. 

 

Safety Instructions of Portable Fume Extractor 

 

  DANGER: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. 

  WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. 

  CAUTION: Indicates a potentially hazardous situation which, if not avoided, will result in minor or moderate injury. 

NOTE:

 

Alerts the user to useful information about proper operation of the machine to avoid machine damage. 

 

  WARNING: To reduce your risk of serious injury, read 

this  Manual  carefully  before  operating  the  product  and 

preserve the Operation Manual properly. 

 

 

Keep  children,  the  elderly,  handicapped  people,  and 

others  who  are  not  familiar  with  this  piece  of 

equipment away from it during operation.   

 

 

Safely  store  all  tools  when  not  in  use.  Store  tools  in  a 

dry safe place to inhibit  rust. Always lock up tools and 

keep them out of reach of children and others. 

 

 

Always use common sense and exercise caution. Do not 

operate under the influence of drugs or alcohol,  when 

tired, or when distracted. 

 

 

Do not wear loose fitting clothing or jewelry as they can 

be caught in moving machine parts. Use proper welding 

clothing and eye protection when using this product for 

welding fume extraction. 

 

 

Keep  work  area  clean  and  organized.  Cluttered  areas 

can be unsafe and dangerous during operation. 

 

 

 

 

 

Ensure that the working environment is suitable for this 

machine. Do not use this product in areas that are wet, 

cluttered, or have poor lighting. 

 

  WARNING:  To  reduce  the  risk  of  accidental  injury, 

never leave machine running while unattended. 

 

 

Check  for  damaged  parts  before  using  machinery. 

Repair or replace any damaged parts before operation. 

 

 

Do not clean, repair, or replace any parts unless power 

to the machine is off. 

 

 

Replace  the  damaged  parts  by  the  instructions  of  the 

manual. If the said instructions are not specified in the 

manual, then contact your dealer. 

 

 

If  the  machine  breaks  down,  contact  your  dealer 

immediately.  Do  not  attempt  to  repair  to  avoid 

damaging the machine. 

 

 

All wires used by the product shall be safely located to 

prevent personal contact with the wires. 

 

 

 

Содержание PFE-2010-S













Отзывы: