IAME X30 125cc RL - TaG, Инструкция по сборке и руководство пользователя

Страница: 14 / 54

- 12 - MAN-043E ENG
2.4.2 INSTALL THE MOTOR-MOUNT, MAKE
SURE TO USE THE M8 ALLEN SCREWS, WITH A
LENGHT SUCH AS TO ENGAGE, IN THE
CRANKCASE, A THREADED LENGHT OF
16÷19mm (THE SCREW MUST PROTRUDE FROM
THE PLATE FOR 16÷19mm ).
(SEE FIG. 3 AND DRAW. PAG. 11)
4 ALLEN SCREWS M8
TORQUE AT 22÷24 Nm (190 ÷ 210 in-lb)
6 mm ALLEN WRENCH
2.5
INSTALL THE CARBURETOR
2.5.1 REMOVE THE PLASTIC PLUG FROM THE
INLET MANIFOLD
(SEE FIG. 4).
WARNING:
MAKE SURE THAT THE PRESSURE HOLE ON THE
GASKET IS NOT PLUGGED.
2.5.2 INSTALL THE CARBURETOR.
TWO 2 NUTS M6 AND TWO WASHERS
(SEE FIG. 5).
TORQUE AT 6 ÷ 10 Nm (50÷ 90 in-lb)
WARNING:
WHEN REPLACING THE CARB GASKET ALWAYS
MAKE SURE THAT THE GASKET IS INSTALLED SO
THAT THE HOLE IN THE GASKET MATCHES
WITH THE TWO PRESSURE HOLES IN THE CARB.
AND IN THE CRANKCASE: OTHERWISE THE
ENGINE WON’T START.
5 mm ALLEN
Fig.3
Fig.4
Fig.5