manualshive.com logo in svg

IAI X-SEL, Руководство по эксплуатации, Страница: 67 / 135

Поделиться
Скачать
IAI X-SEL Скачать руководство пользователя страница 67

 

11-4. 

Position Data: Copy or Move 

The following operating instructions are to copy or move the position data to another position No. 

 

 

 
 
 

Select F1 (Edit) key on the mode selection screen. 
 

 

 
 
 

Select the F1 (Posi) key. 
 

 

 

Select the F3 (Copy) key. 
 

 
 

 

 
 

 
 
Input the first No. and the last No. of the positions 
from which data is copied or moved by using the 10 
keys and press the return key. 
Input the first No. of the positions to which data is 
copied or moved by using the 10 keys and press the 
return key. 
To copy the data, press the F3 (Copy) key. To move 
the data, press the F4 (Move) key. 
 
 

 

Return to the previous screen with the ESC key. 
To write Flash ROM, press the ESC key several 
times to return to the Flash ROM writing screen. 
 

Positions from which data is copied or moved 

First No. 

Last No. 

Positions to which data is copied or moved 
First No. 

 

64 

Содержание X-SEL








































































































































Отзывы:

Нет отзывов