manualshive.com logo in svg

IAI X-SEL, Руководство по эксплуатации, Страница: 64 / 135

Поделиться
Скачать
IAI X-SEL Скачать руководство пользователя страница 64

 

 
 

 

 
 
 

Turn the servo OFF by pressing the ON/OFF key. 
Press the F1 (Disp) key to confirm the servo OFF 
status. 
Move each axes to the designate position via 
manual mode. 
 
Note: Be sure to confirm the status is servo OFF and 

then execute operation. 

 
 
You have to release the brake for the Z axis to be 
moved by manual mode. When the brake is released 
for that reason, there is a possibility that the Z axis 
may fall by weight, such as a hand attached at the 
tip. Therefore, do not execute teaching to the Z axis 
via manual mode. 
 

 

 

 
 
 
 

 
 
 
 
Take in the current position data of the axis No. 
where the cursor is located by pressing the F2 
(Scan) key. 
 

 

 
 
 
 

Press the return key and make the cursor move to 
the next axis. Then press the F2 (Scan) key. 
 

 

Transmit position data to the controller by pressing 
the WRT key. 
The Position No. moves to 12. 
 

* If you change the screen with the PAGE UP · 

PAGE DOWN or ESC keys before transmitting 
the data, the input data will be invalid. 

 

F: Servo OFF 
N: Servo ON 

Axis No. on the 
cursor location 

61 

Содержание X-SEL








































































































































Отзывы:

Нет отзывов