1. Specifications Check
43
1.3.5
Slider part roller type (Model No. : SR)
It possesses the roller structure for the slider design that is the same as the cleanroom type.
1.3.6 Slider spacer (Model No. : SS)
Application SA7R
As the motor unit is higher than the top face of the slider, it is a spacer to make higher than the motor
unit.
70
90
60
64
10
74
3
2-
φ
5 H7
depth 8
+0.012
0
39 (pitch between
φ
5H7 holes ±0.02)
(bolt screwing depth should be 9mm)
4-M5 through
1.3.7
Air vacuum joint on other side (Model No. : VR)
The vacuum joint on the cleanroom use is mounted on the left side of the body from the view of the
motor end in standard. This is the type that has the joint on the other side (in mirror).
