IAG IOC9SG3, Инструкция по установке и эксплуатации

Страница: 17 / 28

17
461306345 (A-001)
TECHNICAL INFORMATION
The installations, conversions and maintenance operations listed in this part must only be carried out
by authorised personnel. The manufacturer cannot be held responsible for any damage to persons or
property resulting from an incorrect installation of the appliance.
• The safety and automatic adjustment devices of the appliances may, during its life, only be modifi ed by the
manufacturer or duly authorised supplier.
• This appliance shall be installed only by authorised personnel and in accordance with the manufacturer’s
installation instructions, local gas fi tting regulations, municipal building codes, water supply regulations,
electrical wiring regulations, AS 5601/AG 601 - Gas Installations and any other statutory regulations.
• Failure to install the appliance correctly could invalidate any manufactures warranty and lead to prosecution
under the above quoted regulation.
• Before installation, make sure that local distribution conditions (gas and electrical) are compatible with the
appliance’s adjustment. Refer to data label for gas type.
• As it is not connected to a device for the evacuation of the products of combustion, it must be installed in
accordance with current regulations and used in a well ventilated location. Particular attention must be paid to
the regulations on ventilation.
VENTILATION
All rooms require an openable window or equivalent, while some rooms require a permanent vent in addition to
the openable window.
Ventilation must be in accordance with AS5601/AG 601 - Gas Installations. In general, the appliance should have
adequate ventilation for complete combustion of gas, proper fl ueing and to maintain temperature of immediate
surroundings within safe limits.
The use of a gas appliance results in production of heat and moisture in the room in which it is installed. Ensure
that the kitchen is well ventilated; keep natural ventilation holes open or install a mechanical ventilation device
(mechanical extraction hood).
Prolonged intensive use of the appliance may call for additional ventilation, for example increasing the level of
mechanical ventilation where present.
UNPACKING YOUR COOKER
• Once the packaging has been removed, thoroughly check that the appliance is in perfect condition. If you have
any doubts do not use the appliance and call our Service Centre.
• Do not move the appliance by the handles.
• Some parts mounted on the appliance are protected by a plastic fi lm. This protection must be removed before
using the appliance. We recommend slitting the plastic fi lm along the edges with a sharp knife or pin.
The packaging materials used (cardboard,plastic bags, polystyrene foam, nails etc.) must not be left
anywhere within easy reach of children as they are a potential hazard source.
6. INSTRUCTIONS FOR THE INSTALLER