8
Changing the fading direction
If you want to change the blow-out direction, first remove the adapter and then loosen
the 8 screws fixing the engine block. When the desired blow-out direction has been
selected and the complete engine box has been turned accordingly, the 8 screws that
were loosened before must be screwed on again.
Fig. Motor box / changing the blow-out direction
If you change the position of the motor box by 180°7 , the complete electronics unit
must be placed on the other side so that the connection adapter can be reattached to
the motor box and the air outlet cannot be blocked.
İn this case, you must first unscrew both inspection flaps on the left and right from the
underside (three screws each).
