14
The function is reset and the letter "F" is deleted from the display.
If the letter "C" appears in the LED display, the activated charcoal filter must be
replaced or regenerated. To reset the display, press the button. The function is
reset and the letter "F" is deleted from the display.
OPERATION via the RF remote control
In addition to the touch-sensitive sensor control on the front, this cooker bonnet is also
controlled via an RF remote control.
You can control the power levels, the lighting including the brightness levels and the
run-on function via the remote control. A rotating LED display informs you about the
selected level with regard to the motor power, timer setting and dimming level.
However, the remote control must be "paired" with the ceiling fan before it can be
operated for the first time.
To do this, you must first switch on the motor on the ceiling fan by pressing the button
after you have connected it to the power supply.
Then switch on the remote control by pressing the central control knob once and all 3
controls will light up. Then press and hold the button on the ceiling fan for 5 seconds
until the letter "P" appears on the LED display of the ceiling fan. The remote control is
then "paired" with the ceiling fan and you can use any function of the remote control.
Fig. Remote control
Motor on and off
Timer on and off
Sensor controls
Light function on and off
LED level indicator
Central control knob