8
Step 3:
Carefully turn the pedestal cabinet up side down and position it onto the worksurface and align it with the
support beams and the inserts in the worksurface. Attach the pedestal cabinet to the support beams using
four #14 X 1.00 screws and 1/4 flat washers and attach the worksurface using the 1/4-20 x .75 hex head bolts
and 1/4 flat washers as shown. Tighten all hardware at this time being sure not to over tighten the bolts going
in the inserts in the worksurface. If you have purchased items such as footrests, lower metal shelves or CPU
holders please see pages 17- 26 for assembly instructions.
Step 4:
Install floor glides into pedestal cabinet base. With the help of at least another person carefully roll the
workbench right side up. Install the drawer bodies into the pedestal cabinet in their original locations.
Step 5:
Use the Ratchet Plug Caps found in hardware kit 021 to cover all open holes in the cabinet.
