BASIC BENCH ASSEMBLY INSTRUCTIONS
NOTE:
YOU'LL BE WORKING WITH THE LAMINATE SIDE OF THE
WORKSURFACE FACING DOWN. BE SURE TO LAY THE
WORKSURFACE ON A FLAT SMOOTH SURFACE DURING ASSEMBLY
TO AVOID DAMAGING THE WORKSURFACE.
STEP 1 - INSTALL THE SUPPORT BEAMS.
(Item 6)
THE BOTTOM OF THE WORK SURFACE HAS THREADED INSERTS INSTALLED
IN IT. NOT ALL OF THESE INSERTS ARE REQUIRED FOR THE ASSEMBLY OF A
BASIC BENCH. SOME INSERTS ARE FOR MOUNTING OTHER TYPES OF
BENCH FRAMES, DRAWERS, INSTRUMENT SHELVES, AND OTHER
ACCESSORIES.
PLACE THE SIDE OF THE BEAM WITH THE TWO OBLONG SLOTS DOWN ON
THE WORK SURFACE. THESE SLOTS WILL ALIGN WITH TWO THREADED
INSERTS AT THE FRONT AND REAR OF THE WORKSURFACE. THREAD SMALL
HEX HEAD 1/4 -20 X 3/4" BOLTS (Item 1) WITH 1/4“ FLAT WASHERS (Item 2)
THROUGH THE SLOTS AND INTO THE INSERTS IN THE WORKSURFACE.
HAND TIGHTEN THE HARDWARE. (SEE FIGURE 1)
3
