i3 3303WI, Руководство пользователя

Страница: 16 / 28

16 | Learn more about i3 products at www.i3-learning.com
B-1. After the camera captures the projection image, a Touch Area window will pop
up. If the captured image is not clear enough, please re-select “Ambient light
mode selection” from “Auto” to “Bright” or “Dim” according to actual ambient
light condition.
Remark: Captured image shows the actual camera view, which is reversed from
projection image. For example: P1 is lower right corner, P2 is lower left corner
and so on.
B-2. Touch Area Boundary Fine-tuning
Step 1: Click on P1, use mouse to drag P1 to upper left corner. Align
adjustable green zone with projected white frame.
Step 2: Adjust P2 to P4 accordingly; adjustable green zone should
completely overlaps the projected white frame.
Step 3: Finally, check again if the green frame completely overlaps the
projected white frame. If not, fine-adjust again.
B-3. When the Touch Area is correctly located click to exit.