i3-TRNG-ACCESSORIES-
IP09CP
.indd
SPECIFICATION
IP09CPR
(Receiver)
IP09CPT
(Transmitter)
Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3bw 100BASE-T1 Ethernet
IEEE 802.3 N-Way Auto-Negotiation
IEEE 802.3x Full Duplex Operation & Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Bandwidth
10/100 Mbps
Max.
Transmission
Distance
10Mbps @ 984 ft (300 m)
100Mbps @ 328 ft (100 m)
Ports & Interfaces
Input
1 x 75Ω BNC
1 x RJ45
Output
1 x RJ45
1 x 75Ω BNC
Power
Interface
1 x (5.5 x 2.1mm) DC
Jack
1 x (5.5 x 2.1mm) DC
Jack
Power
Power Supply
48 ~ 56V Regulated
12 ~ 56V Regulated
Power
Consumption
1W
1W
Environmental specifications
Operation
32-185 °F (0-85 °C);
Storage
-4-185 °F (-20-85 °C);
Humidity
≤ 95%
Physical Characteristics
Dimensions
2
⅝
”
x 5
5
/
16
”
x 1
1
/
16
” (67 x 135 x 27mm)
Weight
0.45 lbs (205 g)
0.47 lbs (215 g)
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
IP09CP. PoE over Coax Extender, 1000 ft
QUICK START GUIDE
Green ON
Green OFF
LED “Breathing”
Power ON Power OFF Power Saving
Table 1.
Power Status LED
Blue ON
Blue OFF
PoE ON
PoE OFF
Table 2.
PoE Status LED
Blue ON
Blue OFF
LED Blinking
Long
Distance
Unlinked or
Ethernet
100Base-T1
Table 3.
Port 1 (RJ45) Mode Status LED
Blue ON
Blue OFF
LED Blinking
Long
Distance
Unlinked or
Ethernet
100Base-T1
Table 4.
Port 2 (BNC) Mode Status LED
Mode
SW1
SW2
SW3
SW4
Auto Mode (Default), recommended OFF
↑
OFF
↑
OFF
↑
OFF
↑
Auto Mode with EEE
ON
↓
OFF
↑
OFF
↑
OFF
↑
100Mbps
ON
↓
ON
↓
ON
↓
ON
↓
10Mbps, not recommended
OFF
↑
ON
↓
ON
↓
ON
↓
Table 5.
Dip Switch Mode Selector
Auto Mode / Default (Recommended):
Auto-Negotiation, automatically sets up the
link speed and transmission protocol.
Auto Mode with EEE:
Energy-efficient
Ethernet-based on Auto-Mode
SW#
Function
OFF
↑
ON
↓
1
Link Speed
10Mbps
100Mbps
2
Ethernet
Disable
Enable
3
100BASE-T1
Disable
Enable
4
Long Distance
Disable
Enable
Table 6.
Advanced Mode, Manual Link Speed and Mode Dip Switch Configuration
PIN
Color
PoE Mode A
(PoE Switch)
PoE Mode B
(PoE Injector)
1
White Orange
TX+ / PoE +
TX+
2
Orange
TX- / PoE +
TX-
3
White Green
RX+ / PoE -
RX+
4
Blue
PoE+
5
White Blue
PoE+
6
Green
RX- / PoE -
RX-
7
White Brown
PoE-
8
Brown
PoE-
PIN LAYOUT
Table 7.
RJ45 Pin Layout
ACT Download &
Documentation
Scan this QR code or visit
Annexxus Configuration Tool (ACT)
installation and
additional documentation.
Contact our Technical Support team at:
1.877.877.7241
or
if you have any
questions or concerns regarding camera installation or if
you require software services or support.
