17
Rev.
130130
i3-TRNG-CAMS-
Di721/Do721
.indd
5.6 ATR*
Set ATR (Adaptive Tone-curve Reproduction) function. You can select ON or OFF.
The default is OFF. If selecting ON, you will enter the ATR submenu, where you can
set LUMINACE and CONTRAST to optimize by image.
LUMINANCE LOW
CONTRAST LOW
*Also known as a form of Digital Wide Dynamic Range. This function expands the
video dynamic range of the camera and improves visibility of images even in high
contrast environments.
5.7 MOTION DET
MOTION DET allows detecting moving objects on the screen. The default is OFF. If
selecting ON, you will enter the MOTION DET submenu. You can set up to 4 motion
areas to detect moving objectives and adjust the motion detection sensitivity from 0
to 127.
5.8 PRIVACY
PRIVACY function mask up to 8 privacy areas on the screen from video monitoring.
The default setting is OFF. If selecting ON, you will enter the PRIVACY submenu. You
can configure up to 8 privacy areas and set color and transparency of the privacy
zones. In addition, you can enable MOSAIC function for the privacy zone.
Note: If you enable MOTION DET function, then PRIVACY function will support 4
zones only.
REA SEL
1/8
TOP
000
BOTTOM
000
LEFT
000
RIGHT
000
COLOR
1
TRANSP
0.00
MOSAIC
OFF
