12
i3-TRNG-CAMS-
68R_78R
.indd
Rev.
150505
5. Feed the camera cabling through the
gooseneck bracket.
6. Slide the protruding mounting screws
through three matching mounting
screw holes on the camera body
and rotate the camera clockwise
to secure the camera body on the
mounting surface. Use a Phillips
screwdriver to tighten three
mounting screws in place.
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
Figure 15. Wall-Mount - Step 6.
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
Figure 16. Wall-Mount - Step 7.
7. Replace the camera cover.
Match up the safety lock screw
with the screw hole on the camera
body, then push straight down
onto the camera cover to engage
the clips. The camera cover will
re-attach.
8. Use a Phillips screwdriver to
re-tighten the safety lock screw.
Figure 17. Wall-Mount - Step 8.
