28
i3-TRNG-CAMS-Ax47R_67R-UM.indd
Rev. 171109
•
Time:
Set the Time value to Slow, Normal or Fast. Time value is the time delay for
Auto Day/Night mode switching. This setting is used in conjunction with the Day
Night setting and is unavailable when Manual Exposure is enabled.
•
Sensitivity Day to Night:
Set the sensitivity value from 0 (lowest) to 6 (highest).
The higher the value, the sooner the camera will switch from day (Color) mode to
night (B/W) mode as the scene becomes darker.
•
Sensitivity Night to Day:
Set the sensitivity value from 0 (lowest) to 6 (highest).
The higher the value, the sooner the camera will switch from night (B/W) mode to
day (Color) mode as the scene becomes lighter.
IR Control
•
IR Control Mode:
Set to
On
,
Off
or
Auto
. Auto mode turns the
IR LED On or Off based on the
amount of available present.
On/Off settings allow turning the
IR LEDs permanently ON or OFF.
•
IR Level:
Set to Auto or Manual. Auto setting will automatically adjust the LED
luminance level based on the lighting conditions. Manual setting allows setting the
IR LED luminance level from 10 to 100% of light intensity.
•
Smart IR:
Set the Smart IR On or Off.
Note, when Smart IR is ON (Enabled),
BLC function is Off (Disabled)
. Smart IR compensates the overexposed area by
adjusting exposure value so that the infrared light does not overexpose the object.
Smart IR technology solves the problem of infrared LEDs whiting out images, such
as people’s faces, when they are too close to the IR LEDs of a camera at night.
Quality
•
Noise Reduction:
Set Noise Reduction value between 0 and 20. The higher the
value, the more digital noise is
removed from the image.
•
Defog:
Digital Defog function
uses built-in video processing
algorithm to improve video
appearance in foggy conditions.
•
Gamma Correction:
Set
Gamma Correction to 0.45 or 1.
•
Reset Exposure:
Reset Exposure settings to factory defaults.
