41
Rev. 170322
i3-TRNG-CAMS-Ax47DC-UM.indd
7.8 Communication Setup
The Communication tab is used to configure network and communication settings on
the camera as well as camera OSD settings.
Note: Do not configure SNMP settings in this tab as these are reserved for development
and advanced troubleshooting by the manufacturer only and are not required for normal
functioning of this camera
Network Settings
• DHCP:
Set to
Enabled
or
Disabled
to have the network automatically
assign an IP address to the camera.
• IP Address:
Enter the camera’s IP
address here.
This option is disabled when DHCP
is enabled.
• Subnet Mask:
Enter the camera’s
Subnet Mask here.
This option is disabled when DHCP
is enabled.
• Default Gateway:
Enter the IP
address of the network’s router if
necessary. Contact your network
administrator for this information.
This option is disabled when DHCP
is enabled.
• DNS:
Enter a DNS IP Address if
necessary.
• HTTP Port:
Enter a HTTP Port
number if necessary.
• Physical Address:
This field
displays camera’s MAC Address.
RTSP Settings
• Authentication:
Enable to allow users to get the video stream using third party
players, such as VLC with the help or RTSP protocol.
UPnP Settings
• UPnP:
Set to
On
to enable or
Off
to disable.
OSD Settings
• Basic Settings:
Enable or disable camera’s OSD settings.
»
OSD Camera Name:
Turn Camera Name OSD
On
or
Off
. Camera Name is
configured in the Video setup tab.
»
OSD Date Time:
Turn Camera Date/Time OSD
On
or
Off
. Camera date/time
settings are configured in the System setup tab.
