30
i3-TRNG-CAMS-Ax47DC-UM.indd
Rev. 170322
MJPEG codec to support this feature.
• Record:
Enable
Record
check box to save an *.mp4 video clip to the micro SD
card each time motion is detected inside the motion detection area.
Note:
At least one video stream (Secondary or Third streaming is recommended
for this purpose) in the Video tab must be set to H264 codec to support this
feature.
On Screen Display
Note:
This feature is subject to arming schedule.
On Screen Display feature will display entered text on the video screen whenever
motion is detected inside the
drawn Motion detection area.
• Enable:
Check to enable On
Screen Display text when
motion is detected by the camera.
• Text:
Enter the text that will be displayed at the time of edge motion detection.
The OSD text settings are configured under Communication setup tab
(See Section
6.8 for more information).
Sending E-mail by MOTION
Note:
This feature is subject to arming schedule.
The camera is capable of sending out notification emails with *.jpg still image
attachments to up to 3 recipients whenever motion is detected. SMTP and email
information must be correctly
configured in the Recording/
Schedule tab and Secondary or
Third (recommended) stream
in the Video tab must be set to
MJPEG codec to support this
feature.
• Enable:
Check to enable motion-triggered E-mail.
• Subject:
Enter the E-mail subject.
• Message:
Enter E-mail body message.
After making any setting adjustments, remember to click the
Save
button to
save any changes made.
